Contax SW II - REV 4.01 Guía de usuario descargar pdf (Pagina 15)

AT-S73, AT-S99 and AT-S102 Version 4.0.1 Software Release Notes

PN 613-001136 Rev. B 15 Allied Telesis Inc.



The Activity LED on the twisted pair port on the AT-CM202-v2 Line Card continues to flash after the

port is disabled. (6083)

 If you install the AT-CM70S Line Card in the AT-CV1200 Chassis, you must set the card’s UART

parameter to the UART Local Console Mode. Otherwise, the line card might not function properly.

Setting this parameter requires the AT-CV5M02 Management Card. This guideline does not apply if

the line card is installed in the AT-CV5000 Chassis. (5015)

Features History

This section lists the history of the new features in the Converteon product.

Version 4.0.0

 None

Version 3.0.0

 This release introduced the AT-CV5M02 Management Card.

Version 2.0.2

 This release introduced the AT-CV1203 Chassis and the dying gasp feature.

 The Diagnostics menu was expanded with a new selection for viewing the version numbers of the

AT-S73 Management Software and the bootloader files on remote AT-CM Line Cards.

 The remote peer management feature was enhanced to support traffic statistics for the twisted pair

ports on remote AT-CM Line Cards.

 The ability to view manufacturer’s SFP information on remote AT-CM70S and AT-CM2K0S Line Cards

was also added in this release to remote peer management.

Version 1.7.0

 This release added support for upgrading the AT-S73 Management Software on remote AT-CM Line

Cards through remote peer management.

Version 1.6.0

 None

Version 1.5.0

 None

Version 1.4.0

 None

Version 1.3.0

AT-S70 Version 1.3.0 introduced the following new features:

 SNMPv3

 T1/E1 Configuration and Status (for AT-CM70S only)

1 2 ... 10 11 12 13 14 15 16 17

Sin comentarios

Contax SW II - REV 4.01 Guía de usuario Pagina 15