Contax SW 2524 - REV A Guía de instalación Pagina 42

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 76
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 41
Installation
1–24 975-0639-01-01 Rev A
This guide for use by qualified personnel only
Installing the DC Switchgear next to Conext SW Inverter/Charger
WARNING
FIRE HAZARD
Make sure the supplied nuts on the inverter/charger are tightened to a
torque of 10–11 ft-lbs (13.5–14.9 Nm). Torque all other connections to the
manufacturer’s specifications.
Make sure the bus bar, washer, and nut are assembled in the order shown
in Figure 1-12 on page 1–25..
Failure to follow these instructions can result in death or serious injury.
ConextSW-NA-InstallationGuide.book Page 24 Thursday, December 20, 2012 2:05 PM
Vista de pagina 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 75 76

Comentarios a estos manuales

Sin comentarios